Linksys RE6300 is a range extender device that is very well known among people for fast, uninterrupted WiFi up to 6,500 square feets. It is a dual band device with two external antennas to enhance network coverage. The device is featured with the latest technologies including Wi-Fi Protected Setup (WPS), Cross-Band Technology, Spot Finder Technology, and beamforming technology. User friendly web interface will allow you to perform linksys re6300 setup easily. Also you can troubleshoot the common errors, perform Linksys RE6300 Reset, Linksys RE6300 firmware update and more. Check out the next segment to know more in this regard.

Linksys RE6300 Setup- Step by Step

We break the linksys re6300 setup process into simple & understandable steps. You can follow the Linksys wifi extender setup steps mentioned further.

Unbox, Place & Power

Unbox the linksys range extender with utmost care. Then decide a location to place the range extender device. Placement is a very significant step and you don’t need a special placement position for linksys re6300 device as it is a wall compact. You can directly plug-in the device to the wall plug. So, to turn it on & place it you have to look for a wall socket which is next to your host router device.

Connect To Network

Prior to initiating linksys re6300 setup you have to connect to the device network. Without establishing connection between your computer/ laptop/ smartphone and linksys re6300 you can’t access its web interface. So, you can connect them using an ethernet cable or wirelessly by accessing wifi settings. Default username and password of your linksys re6300 network is mentioned on the device label. Must check it to initiate the connection. 

Configure RE6300

Configuration of linksys re6300 is very simple through the web interface. You just have to move further with a web browser. Try to use the latest version of google chrome or the browser you have in your device. In the URL bar of the device you have to specify default IP http://192.168.1.1 or http://extender.linksys.com web address. 

When the interface opens, you have to mention the default admin information on the screen. Then follow the setup wizard guide to complete the configuration. Also make sure to change the SSID & password of both the frequencies to avoid network breach. 

Relocate & Test New Network

After performing linksys re6300 setup you have to relocate the device to another location to get the best out of it. Relocation of the device is very simple. You have to be very careful as you need to keep the range extender within the range of the host router. Furthermore you have to keep it away from any heavy metal object or radio frequency device that might interrupt signal transmission. Also test the network you created by using a wifi enabled device. This test will help you in placing the device adequately. 

Troubleshoot Common Errors

Even the best device can occasionally encounter problems. So to rectify the issues you might face with Linksys re6300 setup, you can follow the specified troubleshooting:

Reboot The Device

Rebooting the linksys re6300 range extender device means again supplying the power to the device after disconnecting once. This step might help in resolving the temporary issue you are facing with your linksys range extender. First of all you have to take the device out of the wall socket after cutting the power supply. Next you have to wait for about 5 minutes. Then plug it back to the same power outlet and turn on the power supply. Wait till the device boots up completely and then check whether your issue is resolved or not. 

Check Internet Connection From Host Router

Internet supply to the extender is through your host router device. So if there is any issue with your host router internet then your extender network will also fail to work. Verify that your host router device has the internet working properly or not. To check it up you can use an ethernet port enable device and connect it directly to the host router. If there is an issue then you should connect your ISP for help. 

Perform Factory Reset

Linksys RE6300 Reset can also help in resolving the problem in the network. It will erase all the settings you made to the device using the web interface. So, if you made any error in the network configuration then it can even resolve that. This step will give you a new device to configure again. You can use the reset button on the device or web interface to do Linksys RE6300 Reset. After resetting the device you have to configure it again to add it up to your network.

Conclusion

Last but not the least, configuring linksys re6300 is not a formidable task. One can do it very easily if they have adequate knowledge about the process. Web based interface of the device allows a user to resolve the problem with their network. Linksys RE6300 Reset back to factory settings will erase complete settings of the device and to use it again you have to perform the configuration process again.